QCN IP HD Cameras Firmware Updates

CAUTION: Updating the firmware incorrectly or using an update on the wrong DVR can permanently damage the chip-set on the DVR and make it unusable. Please verify that this update is written for your model.

Firmware updates are released to resolve performance issues and/or to add features. Any update could fail and cause problems if the steps are not followed correctly, or if the update is not required.

If you are not experiencing an issue that the firmware update was written to resolve, or you do not need the feature that is added by the update, please do not run the update.

If you have any questions about updating your firmware, please contact technical support.  Q-See is not liable for systems damaged while updating the firmware.  Q-See recommends contacting technical support, before updating, to avoid damage to your system.

 

Step 1:  Download the firmware for your model from one of the links below.

QCN7001B / QCN7002D FIRMWARE 20130906 (FIX FOR CONNECTION ISSUES)

QCN8001D and QCN8002B FIRMWARE 20130521 (Support NEW NVR like QC826)

QCN8012B FIRMWARE 20150306 (ADD 3MP @13FPS)

QCN8026B FIRMWARE 20161014 (PATCHES, ENHANCE STABILITY)

QCN8029Z FIRMWARE 20161014 (PATCHES)

QCN8030D FIRMWARE 20161014 (PATCHES)

QCN8033B FIRMWARE 20161123(PATCHES)

QCN8035Z FIRMWARE 20161026(PATCHES)

QCN8035ZA FIRMWARE 20160603(PATCHES)

QCN8093B FIRMWARE 20190214 (Support AI)

QCN8099B FIRMWARE 20171124 (Support IVA)

 

Step 2Click here to update from your computer using the Configtool.


How did we do?


Q-See (opens in a new tab)

Powered by HelpDocs (opens in a new tab)