QC Series Analog Firmware Updates

CAUTION: Updating the firmware incorrectly or using an update on the wrong DVR can permanently damage the chip-set on the DVR and make it unusable. Please verify that this update is written for your model.

Firmware updates are released to resolve performance issues and/or to add features. Any update could fail and cause problems if the steps are not followed correctly, or if the update is not required.

If you are not experiencing an issue that the firmware update was written to resolve, or you do not need the feature that is added by the update, please do not run the update.

If you have any questions about updating your firmware, please contact technical support.  Q-See is not liable for systems damaged while updating the firmware.  Q-See recommends contacting technical support, before updating, to avoid damage to your system.

 

Step 1:  Download the firmware for your model from one of the links below.

QC304 (20140819) Patches, Scan N View

QC308 (20140819) Patches, Scan N View

QC3016 (20140819) Patches, Scan N View

QC40108 (20120522) QC View Support

QC40196 (20120605) QC View Support

QC40198 (20110915) Configuration Back Fix

QC444 (20120508) QC View Support

QC448 (20121020) Rebooting Fix

QC524 (20140804) Patches, Scan N View

QC5416 (20140804) Patches, Scan N View

QC588 (20140804) Patches, Scan N View

 

Step 2aClick here to update via USB Flash Drive

 

Step 2bClick here to update from your computer using the Configtool.


How did we do?


Q-See (opens in a new tab)

Powered by HelpDocs (opens in a new tab)