QT Series – QTH84 / QTH83 Analog HD DVR
1080P Resolution @ 12 FPS, 720P @30FPS, 960H @30FPS, H.264, 8 Channel, Analog HD, Scan N' View, Motion Detection
How to Setup
FAQ Top Answers
Recovery Firmware (Only for NON Booting Systems)
CAUTION: Updating the firmware incorrectly or using an update on the wrong DVR can permanently damage the chip-set on the DVR and make it unusable. Please verify that this update is written for your model.
Firmware updates are released to resolve performance issues and/or to add features. Any update could fail and cause problems if the steps are not followed correctly, or if the update is not required.
If you are not experiencing an issue that the firmware update was written to resolve, or you do not need the feature that is added by the update, please do not run the update.
If you have any questions about updating your firmware, please contact technical support. Q-See is not liable for systems damaged while updating the firmware. Q-See recommends contacting technical support, before updating, to avoid damage to your system.
Step 1: Download the firmware
The QTH84 is compatible with ALL brands of Analog BNC cameras. Resolutions supported are D1 (702x480) and 960H (960x480).
ANALOG HD Compatibility Chart